As the largest plastics and rubber industry exhibition in Asia, CHINAPLAS 2024 will bring together the world's renowned exhibitors to showcase the latest technological achievements and innovative applications. In order to explore the latest technology trends in the industry, "Adsale Plastics Network" (AdsaleCPRJ.com) has compiled information on some of the innovative technologies of exhibitors, and launches the "CHINAPLAS 2024 Top 10 Hot Technologies Survey".
At the same time, during and after the exhibition, we will conduct special interviews and reports so that you can learn more about these technologies.
Company：NatureWorks LLC
Booth No.：1.2D48
Using NatureWorks’ Ingeo️ PLA and CJ Biomaterials’ PHACT️ PHA, the two companies are developing bio-based solutions to increase the impact strength of clear, thermoformed food packaging containers and soften films for multilayer flexible film structures while maintaining bio-based content levels and options for compostability that can meet certification requirements in the US and EU.
Company：BEIJING PHABUILDER BIOTECHNOLOGY CO., LTD.
Booth No.：1.2H72
100% bio-based PHA 3D printing filament products have excellent biodegradability and mechanical properties, providing an environmentally friendly and high-performance option that meets the needs of many applications, such as medical, industrial design, consumer products, etc.
Company：SHENZHEN HENGCHANGTAI TECHNOLOGY CO., LTD.
Booth No.：2.2H60
Biodegradable materials (BPE JJ1200 003) are suitable for cosmetic tubes, toothpaste tubes, and daily chemical bottles. Their physical, mechanical, temperature resistance, chemical resistance, appearance, processability are consistent with LDPE. These products can be completely biodegraded in open soil environment. The final products are water, carbon dioxide and biomass, which complies with environmental protection. There is no microplastics residue after degradation.
Company：CELANESE (CHINA) HOLDINGS CO., LTD.
Booth No.：7.2C51
Celanese's POM ECO-B contains up to 97% bio-content via a mass-balance approach as certified by the International Sustainability and Carbon Certification (ISCC+). It reduces carbon dioxide footprint per kilogram of POM polymer by more than half without any impact on properties or need for requalification.
Company：POLYPLASTICS (SHANGHAI) LTD.
Booth No.：7.2C81
Using bio-based feedstock, DURACON® bG POM and LAPEROS® bG LCP can reduce the product carbon footprint by 50% and 20% respectively; the renewable content (mass balance method) is up to 97wt.% and about 50wt.%. The goal is 100% renewable energy, including segregation and chemical recycling.
Company：Highsun AKRO Engineering Plastics (Changzhou) Co., Ltd
Booth No.：7.2D72
AKROMID NEXT is an innovative and sustainable alternative to conventional nylons. This new product line has bio-based, biomass-balanced or recycled contents. Some products are offered with ISCC PLUS or REDcert sustainability certification.
Company：HUAFON GROUP
Booth No.：6.2A32
Huafon Group has launched E-TPU made of aliphatic TPU. When used in the midsole of sports shoes, it not only improves the yellowing resistance, but also has a lower density (making sports shoes lighter) and is more resilient.
Company：AUDIA ELASTOMERS
Booth No.：6.2A86
Audia Elastomers' AudiaFlex family of sustainable thermoplastic elastomers is one of the industry-first TPE portfolios, and it can include up to 100% recycled content or 75% bio-based content. It is comprised of customizable grades which are produced from post-consumer, post-industrial, bio-based, and marine-based sources, and it can be used in household appliances, consumer electronics, personal care, automotive interior and exterior decoration, daily consumer goods and other applications.
Company：HEXPOL TPE
Booth No.：6.2D85
Dryflex HiF is a range of high melt-flow and scratch resistant TPS-SEBS compounds with hardness 70-90 Shore A offered by HEXPOL TPE (Booth: 6.2D85). It was developed primarily for injection molded panels and skins, and it is part of the company’s next-generation materials for automotive interiors. The compounds’ surface performance is confirmed by Erichsen and PMMA wheel scratch resistance. They are tested with Taber and Crock abrasion testing, xenon testing for lightfastness, and heat ageing testing.
Company：KRAIBURG TPE
Booth No.：7.2K42
KRAIBURG TPE’s Asia Pacific Sustainability TPE solutions comprise up to 48% post-consumer recycled (PCR) content. Carbon footprint data can be provided. They can meet multiple applications in automobiles, consumer electronics and power tools.
Company：ZHEJIANG PETROLEUM & CHEMICAL CO., LTD.
Booth No.：6.2C01
Zhejiang Petrochemical Phase I has selected INOES s INNOVENE S process of double-loop slurry technology, with the capacity of 300,000 tons per year, and Phase II has selected LyondellBasell’s Hostalen ACP process of kettle type slurry technology, with the capacity of 350,000 tons per year, which are designed to produce high performance and multi-type HDPE resins, including blow molding, piping, lm, injection and yarn grade, etc.
Company：SUZHOU HECHANG POLYMERIC MATERIALS CO., LTD.
Booth No.：7.2C02
Hechang reduces the weight of auto parts on the premise of ensuring product quality, and helps customers continuously explore and innovate while reducing costs. The products are characterized by changeable colors and wear resistance, which makes it easier to achieve a win-win situation of high quality and high efficiency.
Company：JIANGSU ORIDA ADVANCED MATERIALS TECHNOLOGY CO., LTD.
Booth No.：7.2F11
AUSTON® PPS series features glass fiber reinforced, carbon fiber reinforced, low DK/DF, conductive antistatic, wear-resistant, high CTI value, graft toughening, high crystallization (low burr, easy molding) and so on. It can be widely used in automobiles, new energy, energy storage, hydrogen energy, electronic appliances, communications, smart equipment, aerospace, rail transportation, and other industries.
Company：ZHENJIANG CHI MEI CHEMICAL CO., LTD.
Booth：6.2C72
The raw materials come from PCR (Post-Consumer Recycled Plastic). Through certification by a third party, the materials can effectively reduce the impact on the earth (oil mining), plastic production and resource waste, assisting customers in applying for environmental protection certification (EPEAT mark) for electronic products, obtaining governmental projects, and implementing corporate sustainability goals.
Company：COVESTRO (SHANGHAI) INVESTMENT CO., LTD.
Booth No.：7.2C38
Covestro’s circular economy solutions include: rPC, PC containing recycled biomass based on the mass balance method, and rPC containing chemical recycled raw materials that will be launched soon, helping customers upgrade green and environmentally friendly products and seize the opportunity to go global.
Company：WANHUA CHEMICAL GROUP CO., LTD.
Booth No.：7.2C41
Wanhua Chemical, working as a PC producer with the advantages of the whole industry chain, achieves the entire process of new material production, bucket processing, old barrel recycling, crushing, cleaning, granulation and regeneration, starting to open the cycle and regeneration journey of PC drinking buckets. The process is UL2809 certified.
Company：BASF (CHINA) CO. LTD.
Booth No.：7.2C42
It is a breakthrough technology for PU flexible foam recycling. The key benefit of this recycling technique will be a very easy way of recycling of the End of Life (EoL) flexible PU foams with reduced energy consumption. The reprocessed PU can be incorporated into new PU formulations with recycling content up to 20-30 wt%. The recycling cycles can be repeated multiple times without limitation. This technology can be used in multiple automotive applications like seating and steering wheel, as well as in furniture applications.
Company：DOMO ENGINEERING PLASTICS (JIAXING) CO., LTD.
Booth No.：7.2D52
TECHNYL® 4EARTH® based on recycled content with certified CO2 reduction offers the highest industry quality standard in terms of quality consistency and performance. Various grades with glass fiber or carbon fiber content up to 50% are available. Typical 30% glass fiber reinforced TECHNYL® 4EARTH® materials can save 80% of carbon footprint emissions compared to traditional new TECHNYL® materials.
Company：SUZHOU JONO ENVIRONMENTAL TECHNOLOGY CO., LTD.
Booth No.：2.1A95
It is widely used in processing systems such as color and material sorting of various recycled plastics. It has the characteristics of fast sorting speed and wide sorting range. It can simultaneously realize the identification and sorting of various plastic materials such as 3A bottles, 4A bottles, 5A bottles, oil bottles, miscellaneous plastics, PP lunch boxes, etc.
Company：EREMA ENGINEERING RECYCLING MASCHINEN UND ANLAGEN GMBH
Booth No.：2.1C55
The advantage of the EREMA bottle-to-bottle VACUREMA® recycling system is the SafeFlake technology in the vacuum reactor. It combines purification, drying and viscosity (IV) processing in one unit. By pretreating PET sheets under vacuum and appropriate temperatures, moisture and migrated materials can be effectively removed prior to extrusion. This prevents hydrolytic and oxidative degradation of the melt in the extruder. This technology also has relatively advantages in terms of investment cost and energy consumption.
Company：STARLINGER RECYCLING TECHNOLOGY
Booth No.：2.1F51
Starlinger's new recoSTAR PET art bottle-to-bottle recycling production line consumes less energy and requires less time for maintenance. The machine occupies a very small area and has a compact structure. It increases output by 15% and saves production costs by about 21%.
Company：GNEUSS KUNSTSTOFFTECHNIK GMBH
Booth No.：2.1H26
Typical applications for the OMNI recycling machines from Gneuss include the processing of PET scrap into high-quality end products such as thermoformed sheet (suitable for food contact), staple fiber, POY, FDY, BCF and strapping. In addition, a wide range of raw materials such as PS, PP, PE, PLA can be recycled. The OMNI series is also used in the decontamination of post-consumer waste for production of direct food contact products such as HDPE bottle caps and coffee caps, as well as for odor reduction and degassing of PA, SAN or other polymers.
Company：HUBEI RUILI ENVIRONMENTAL MACHINERY CO., LTD.
Booth No.：NH07
This line is especially for the recycle of waste PET bottle like water bottle, coke bottle etc. The capacity is 1000-3000KG/h and can be increased or decreased according to the user's production demand and processing level.
Company：JIANGSU ACERETECH MACHINERY CO., LTD.
Booth No.：ND18
The continuous SSP (Solid State Polycondensation) production process, developed and manufactured by ACERETECH for food-grade rPET, consists of several key components. These components seamlessly integrate with preceding granulation equipment to achieve continuous crystallization and viscosity enhancement of rPET pellets. This system is capable of achieving approximately 0.02dl/g/H viscosity enhancement, effectively removing acetaldehyde to ensure its content is ≤1ppm, and reducing the levels of both polar and non-polar toxic volatile compounds (such as 3-acetone, toluene, benzophenone, and tetrahydronaphthalene) to less than 200PPB.
Company：HEBEI KEAO PLASTIC CO., LTD.
Booth No.：1.2B106
Calcium zinc stabilizer is non-toxic and environmentally friendly. It is an organic compound based on rare earth lanthanide elements and is produced using a special process. Since rare earth ions have many empty orbits and a large radius, they can attract free electrons through electrostatic attraction. This prolongs the thermal stability time of PVC and has the advantages of high efficiency, no pollution, and strong thermal aging. It can be used in various PVC products such as cable materials, water pipes, injection molded pipe fittings, profiles, and food packaging materials.
Company：ANHUI SHAFENG ADVANCED MATERIAL CO., LTD
Booth No.：1.2C22
Used in polyvinyl chloride products, combined with zinc stearate, etc. to produce PVC processing stabilizers. The company specializes in the production of fatty acid derivative products, and its quality has reached the international level.
Company：COACE CHEMICAL COMPANY LIMITED
Booth No.：1.2D17
COACE’s photovoltaic film functional graft masterbatch is used in photovoltaic films to maintain the long-term adhesion of the packaging films, thereby improving the outdoor weathering and aging resistance of photovoltaic modules.
Company：NOURYON CHEMICALS (NINGBO) CO., LTD
Booth No.：1.2D77
In response to different pain points in different industries, Nouryon has launched a number of innovative Expancel® microsphere products. For example, Expancel® microspheres can help automotive industry achieve lightweighting, saving energy and reducing emissions. Ultra-white Expancel microspheres can meet Chinese consumers’ needs for white shoes. For the first time, the company has brought low-dust microsphere products to Chinese customers, helping customers solve the industry pain point of difficult to operate expanded microspheres.
Company：FUJIAN KUNCAI MATERIAL TECHNOLOGY CO., LTD.
Booth No.：2.2F24
The TiOEX 8 series titanium dioxide is produced using world’s first HCI extraction process that does not have high requirements for raw materials. The main products are of high purity, and the by-products can be utilized. The energy consumption of the production process is low and no solid waste is generated. The products are coated with inorganic material and finished with an organic surface treatment. They are suitable for a wide range of applications, such as medium and high-quality plastic masterbatches, plastic floor adhesives, PVC, pipes, rubber products, injection molding and compression molding materials, various plastics for industrial use, as well as polyvinyl chloride, polystyrene, polyolefin, and engineering plastics.
Company：CHINA JUSHI CO., LTD.
Booth No.：7.2C09
Thermoplastic roller forming composite materials using polypropylene resin and glass fiber fabric as raw materials can meet the requirements of automotive lightweight. As a new glass fiber product of continuous fiber reinforced thermoplastic material, 372 is especially suitable for continuous GF/PP thermoplastic fabric sheet production process, high production efficiency and can be made of molded sheet with big width with good mechanical properties and oxygen aging properties.
Company：Colloids Plastic (Suzhou) Co., Ltd.
Booth No.：8.2F27
The GRAPHANCED® is a range of graphene masterbatches for thermoplastic and thermoplastic/elastomer polymers. Work is underway for development of GRAPHANCED® products to be compatible with higher-end polymers such as PEEK, PPS. The company joined forces with key partners and are now leading the graphene masterbatch industry to fully commercialize exciting new products with enhanced functionality powered by graphene and other 2D materials and nanomaterials.
Company：Clariant Chemicals Technology (Shanghai) Ltd.
Booth No.：8.2F32
Clariant enables manufacturers to reach Performance Level Category 0, which holds for 600 volts. That way, conducting parts can be fit closer together, allowing further miniaturization and weight cutting. Exolit is hydrolysis-stable and can be used in dedicated hydrolysis resistant formulations as well. Exolit can be used for any color. The company’s solution affects the color of the polymer less than any other product.
Company：LG Electronics Inc.
Booth No.：8.2F62
LG PuroTec, an inorganic antimicrobial additive, is a functional glass material that is added during the manufacturing process of materials such as plastics, textiles, coating and rubber. Its purpose is to prevent microbial damage to products. Featuring excellent thermal stability, LG PuroTec can withstand high temperatures without altering the physical properties of the applied product during plastic extrusion and injection.
Company：YINJINDA FILM CO., LTD.
Booth No.：1.2D92
This product has a certain degree of crystallinity, the film does not bond with PET bottle flakes during the recycling process. There is no agglomeration problem, and there is no need to separate the label and bottle body fragments, the polyester label and the bottle body can be recycled. The film performance is consistent with the conventional PETG shrink film, and the shrinkage range can be customized according to customer needs.
Company：Forop Advanced Materials Co., Ltd.
Booth No.：1.2F92
With high transparency and gloss, it can bring bright and clear visual effects to packaged products. The glossy film has low thermal shrinkage, ensuring dimensional stability in various environments. In addition, it also has excellent low-temperature puncture resistance and tensile properties, and performs well in applications in freezing environments. It also has strong impact strength, which can effectively resist external impacts and protect the safety of items in the package. It has excellent ink and coating adhesion, making printed patterns more vivid and lasting.
Company：FUJIAN BILLION POLYMERIZATION FIBER TECHNOLOGY INDUSTRY CO., LTD.
Booth No.：2.2F66
Fujian Billion High -tech Meterial Industry Co., LTD is one of large polyester film manufacturers, with an annual capacity of 835,000 tons of polyester film, APET sheet and PET chips (film grade). The company introduced 19 advanced BOPET production lines from Germany DORNIER and 20 APET product lines. BOPET is the best material for printing.
Company：WINDMOELLER & HOELSCHER KG
Booth No.：2.1H61
AQUAREX turns blown film production upside down and changes the typical structure of a blown film line. It extrudes downwards and uses water instead of air as cooling medium. The use of water allows extremely fast cooling of the melt, a low degree of crystallization and an extremely amorphous film structure. The result is a film with a striking gloss, high transparency and exceptional puncture and tear resistance.
Company：Brückner Maschinenbau
Booth No.：2.1 H62
Brückner's latest composite current collector film stretching technology can reduce film thickness, weight, metal content, and improve safety, allowing battery to have excellent energy density.
Company：Hosokawa Alpine AG
Booth No.：2.1H91
The growing global demand for multi-layer flexible packaging films requires special multi-layer co-extruded film production lines. High barrier film can effectively prevent the penetration of oxygen, nitrogen, carbon dioxide and moisture, and it can effectively maintain the aroma and taste of the final product. Using Hosokawa Alpine 7-, 9-, and 11-layer multi-layer high barrier film production lines can achieve more layers and save materials and time, achieving customized production of films.
Company：MACCHI S.p.A
Booth No.：3F11
R-POD FLEX line, the latest evolution of the innovative POD FLEX (Polyolefin dedicated) system, specifically designed for very high productivity and high contents of PCRs. Conceived for sustainable specialty films with reduced thickness, perfect sealing and excellent optical and mechanical properties, this new technology allows to meet the growing market demand of highly flexible extrusion lines, capable of extruding recycled materials up to 1,200 kg/h.
Company：SBI Mechatronik GmbH
Booth No.：2.1F39
The online thickness measurement system for extruded films and sheets can be used to measure the thickness of cast films, thermoformed sheets and thick plates online. By measuring the transverse sheet thickness of the film or sheet during the extrusion process, any abnormalities are detected in a timely manner. Issue an early warning to the operator and achieve simple operation with the help of a visual display interface.
Company：MARCHANTE
Booth No.：2.1F111
MASIM is a state-of-the-art mechanical tenter that can stretch plastic films on both the machine and transverse directions simultaneously. It enhances film production by ensuring better homogeneity of porosity, lower energy use, reduced thickness (down to 2µ) for wet process, while producing more square meters of film.
Company：AKEI HOLDINGS COMPANY LIMITED
Booth No.：1.1D82
AKEI has integrated Internet of Things (IoT) and Virtual Reality (AR) technologies into its blow molding equipment and mold products and services. Through AR and IoT technologies, operators can observe the operating status of remote equipment in real time.
Company：DONG GUANG GOLDEN SINCERITY MACHINERY
Booth No.：1.1J107
The extrusion volume is large, the action speed is fast, and the output is high; the wall thickness control system is optional, so that the wall thickness of the product is uniform and raw material is saved; it can be equipped with automatic flashing, product and flash separation device, high degree of automation; optional remote maintenance function. Suitable for plastic products made of PE, PP, TPV, EVA, etc. It is suitable for many industries such as medicine, pesticide, daily chemical, industry, toy, chemical industry, food, automobile, tool, etc.
Company：ZHEJIANG HUANGYAN RUIYING MACHINERY CO., LTD
Booth No.：8.1A27
The exhibition of the automatic blow molding machine adopts flip feeding the preform patent technology, overcoming the deficiency of the traditional manipulator. Clamping, feeding preform, and chain operation use servo motors. Models available from 1 cavity to 12 cavities.
Company：COPERION GMBH
Booth No.：2.1F106
For this STS 75, Coperion has increased the specific torque of the STS twin-screw extruder from 11.3 Nm/cm³ to 13.6 Nm/cm³. Compounding manufacturers can achieve higher product quality while increasing productivity by 20% for every application. The key to achieving this level of performance and process technology improvements is the optimization of the core components of the drive section
Company：LEISTRITZ MACHINERY (TAICANG) CO., LTD.
Booth No.：2.1F116
The Leistritz ZSE MAXX series twin-screw extruder follows the concept of "German engineering design - Chinese procurement and assembly that meets high standards". This extruder is assembled in Taicang using key components imported from Germany with German design standards. It does not only maintain high quality standards, but also meets the special needs of customers in the Asian and Chinese market.
Company：MAAG Germany GmbH
Booth No.：2.1H85
The C-USG underwater strand pelletizing system is a localized version of the proven M-USG, which for decades has operated successfully around the world. It features long service life and high availability thanks to the extremely wear-resistant cutting tools and quick-change cutter head.
Company：Zhejiang Kehao Plastic Machinery Co., Ltd.
Booth No.： 2.1A116
The granulator has the characteristics of high output and low energy consumption. It is equipped with a large torque reduction box and an electric motor. The screw of this machine is designed to have no dead ends and no iron jamming effect, which effectively increases the production capacity and increases the plasticizing effect of plastics. The screw is carefully developed and designed, the whole machine and its components are reasonably equipped.
Company：CGC TECHNOLOGY INTERNATIONAL LMITED
Booth No.：6.1A65
CGC’s UWP brand underwater pelletizing system is designed to be easy to use, flexible to operate, and cost-effective. The equipment cost is only half of the imported equipment, saving a lot of costs. Its quality is world-leading, its granulation is uniform and beautiful, its dehydration effect is good, and its moisture content is as low as 2000PPM. This system subverts the traditional structure and realizes Industry 4.0 automation.
Company：WUXI BOYU PLASTIC MACHINERY CO., LTD.
Booth No.：6.1C56
Optional conical and parallel twin-screw extruders with patented four- and five-roll calenders, with daily throughput from 6-8 tons to 80-100 tons, suitable for different machines and configurations. The precise online EIR system with US patent makes the surface pattern of the veneer SPC floor the same as the wood grain of the solid wood floor.
Company：SUNMAC MACHINERY CO., LTD
Booth No.：6.1D65
The twin-screw extruder 73 plus can optimize the particle shape to ensure smooth and uniform particle surface, high density and good fluidity, effectively preventing oxidation and adhesion. It features fully automatic continuous production, the one-click start-up is convenient and efficient. It shortens curing time, reduces floor space and cooling water requirements, and achieves energy conservation and environmental protection.
Company: BATTENFELD-CINCINNATI (FOSHAN) EXTRUSION SYSTEMS LTD.
Booth No.：7.1B10
For material of A-PET/G-PET/r-PET/PL PS, regrind up to 70%; integrated automation system of BCtouch UX for film or sheet extrusion lines; high vacuum system for venting of PET 800 to 1200 kg/h. The main machine has a modern machine structure, compact and modular design, direct drive (AC) air-cooled drive, continuous speed control and high torque thrust bearings.
Company：GUANGDONG LIANSU MACHINERY MANUFACTURING CO., LTD.
Booth：7.1C21
Designed with long L/D ratio of 36:1; installed with high-efficiency permanent magnetic servo motor; high-efficiency, low-noise gearbox with resilient coupler; high output, low power consumption. Equipped with data acquisition and analytical system developed by Liansu, realizing high efficient production management.
Company：KONRUN INTELLIGENT MACHINERY (NINGBO) CO., LTD.
Booth No.：7.1D31
The production line adopts the method of multi-layer extrusion to produce five layers of composite corrosion-resistant nylon tubes. The production line selects the high-efficiency corrosion-resistant special extruder specially designed and manufactured by Konrun company for PA pipes, the head is equipped with high-speed precision extrusion device, and the front and rear solution pressure display can realize high-precision closed-loop control and extrusion, which ensures that the size of each layer of composite pipes can fully meet the design requirements.
Company：NORDSON CORPORATION
Booth No.：6.1C57
Nordson’s BKG® HiCon™ K-SWE-HD/RS allows blown film manufacturers to process up to 100% recyclable in their production line. It is a continuous backflush filter ensuring constant pressure and reducing the number of screen changes, thus leading to fewer line shut-downs and higher end-product quality. Automated features like the melt pressure-controlled backflush and venting start allow less operator intervention and low backflush waste.
Company：FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD.
Booth：4.1C18
The FB-300Re displayed this time is a PET+TPE dual-material, dual-color, multi-component molding system equipped with an electric injection unit. It will be equipped with a 1-in-1 crisper mold (box + lid) and a French SEPRO automated take-out system. The molding cycle is about 30 Second. The space occupied by the machine with the same specification is reduced by 15%; the overall rigidity of the new clamping mechanism is increased by 15%. The turntable specifications are upgraded, the mold load is increased by 10%, and with a high-end electric turntable, the speed is increased by 10%. The movable mold and the large column are designed to have no contact, the opening and closing speed of the mold is increased by 15%. The injection unit is configured with linear slide rail, which saves energy by 10%. The system pressure of the whole machine is increased by 50%, and the piping adopts new technology with no welding design. The system accuracy is higher, and the response speed is increased by 20%.
Company：DEMAG PLASTICS MACHINERY (NINGBO) CO., LTD.
Booth No.：4.1C32
The 48-cavity lightweight conjoined water cap production system has a product weight of only 1.2g and a molding cycle of <3s. The cap does not separate from the bottle after opening, making it easier to recycle and reuse, in line with the concept of low-carbon environmental protection.
Company：Ningbo Lk Injection Molding Machine Co., Ltd
Booth No.：4.1C52
Elettrica all-electric injection molding machine takes "ultra-stable, high-efficiency, ultra-high cost performance" as its breakthrough point and "higher, faster, stronger" as its goal. It is suitable for medical, packaging, 3C electronics, optics, food and Cosmetics and other industries. EL all-electric machines have high precision, good stability, fast response speed, low energy consumption. This injection molding machine adopts precision linear support, high-precision platen guide and platen parallelism, and smooth movement, effectively reducing energy consumption during platen movement.
Company：YIZUMI HOLDINGS CO., LTD.
Booth No.：4.1D32
UN165V4UR features precise control, reliability and stability, and user-friendly design. It adopts direct-clamping + high-rigidity platen, standard servo drive, energy-saving and efficient vertical injection, and the injection mechanism is simple and reliable. Suitable for molding of plastic products with inserts and multi-purpose injection molding process.
Company：ARBURG (SHANGHAI) CO., LTD.
Booth No.：4.1D42
The Allrounder 470 E Golden Electric injection molding machine, with a clamping force of 1000 kN, is used for the production of automotive liquid silicone valves. Using an 8-cavity mold from Chinese partner Gaoyuan, eight LSR components weighing 0.8 grams each can be produced in a cycle time of around 55 seconds. Injection is sprueless and takes place directly via a pneumatic cold runner system.
Company：KRAUSSMAFFEI MACHINERY (CHINA) CO., LTD.
Booth No.：4.1D52
ColorForm™ by KraussMaffei combines the process engineering and benefits of injection molding technology and reaction process machinery in an ideal manner. ColorForm is based on the principle of multi-component injection molding and the special characteristic here is the fact that the process does not use a second thermoplastic injection unit once the basic thermoplastic body has been injection molded. Instead, the second stage involves flow-coating the substrate of the basic body with polyurethane (PUR) or polyurea (PUA). ColorForm process can be widely used in automotive interior and exterior parts, electrical appliances and consumer goods.
Company：NINGBO MINGGUANG WEIYE MACHINERY CO., LTD.
Booth No.：4.1G64
This series of injection molding machines adopts composite mold insulation device, special hot kerosene inner circulation cylinder, and are equipped with professionally designed screw components of thermosetting plastics, which are suitable for processing various thermosetting plastics.
Company：ENGEL MACHINERY (SHANGHAI) CO., LTD.
Booth No.：5.1C42
Skinmelt technology can be used to increase the recycling rate of a plastic part. Those sandwich components with a core of recycled material embedded in virgin material allow recycled materials to be used more widely. The aim is firstly to design more and more products for this form of two-component production and secondly to increase the proportion of recycled material in the sandwich structures. One advantage of this technology is cost reduction. For the surface high quality material and less expensive material for the core component, like recycled material, can be used.
Company：Tederic Machinery Co., Ltd.
Booth No.：5.1C52
MultiMold™ front combination lighting injection molding application is used in the field of automotive headlight industry. The program has provided a series of high-end complex lamp injection molding production for the field of EV, with high yield and good performance. The solution meets the diversified production needs of users, reduces the cost of customer equipment replacement and maintenance, and helps EV brands achieve product design freedom.
Company：MULTITECH MACHINERY LIMITED
Booth No.：5.1D12
Two-color, two-component vertical injection molding machine with turntable: One-time injection molding of LSR and engineering plastics greatly saves processing time and manpower investment in secondary molding. It also ensures product stability, efficient and high-quality production without secondary assembly.
Company：HAITIAN INTERNATIONAL HOLDINGS LIMITED
Booth No.：5.1D32
The Venus Series influences the global market for electric injection molding machines more than ever before. With clamping forces of up to 8,000 kN and injection speeds in several performance levels up to 500 mm/s, Venus produces clean, high-quality precision and extremely thin-walled parts at an attractive price/performance ratio. With exemplary energy efficiency. All-electric dynamic with highest precision and up to 70 % energy savings.
Company：ZHEJIANG SONLY INTELLIGENT EQUIPMENT CO., LTD.
Booth No.：5.1D82
The F9-supersonic series injection molding machine features: independent processing; high rigidity platen to reduce mold wear; high efficiency and cost savings of wide platen design; flexibility of European robot installation; no resistance and no disassembly of the injection double-layer guide rail; precision and stability of the twin cylinders; the leak-proof cleaning of the non-welded main oil pipe; etc.
Company：MOLD-MASTERS CO., LTD.
Booth No.：5.2F15
Making its debut in Asia Pacific, the Sprint APEX gate seal is designed to significantly minimize the presence of injection flow lines, which can increase the ESCR level of CSD caps by up to 40%. Additionally, in-field beta testing of the Sprint APEX gate seal on high-cavitation molding systems determined that stress cracking was eliminated on all dimple and non-dimple CSD-cap designs.
Company：YUDO (SUZHOU) HOT RUNNER SYSTEMS CO., LTD
Booth No.：5.2F48
TINA-PMC nozzle series is focused on multi-cavity product applications. It was based on special structural design and material applications to have achieved optimal thermal profile of nozzle tip and provided longer lifespan of valve pin and gate insert. It is suitable for small nozzle pocket and compact pitch cutout as well.
Company：Z-MOULDS
Booth No.：2.1A52
Z-moulds specially launches a 128-cavity mold with a width of 696 mm and a height of 1196 mm. Based on its original z-type sliding mold patented technology, Z-moulds optimized this 128-cavity mold to reduce the drop height of the bottle cap by nearly 500 mm, shortening the drop time by 0.12 seconds. In addition, compared with the existing sliding molds on the market, the weight of the sliding half of the mold is reduced by 45%, and the mold opening and closing time is shortened by 0.08 seconds.
Company：NINGBO AOSHENG MOULD CO., LTD.
Booth No.：2.1F130
At the exhibition, a preform mold with 144-cavity self-cleaning function will be launched. New cooling structure and capping mold with ASM patent will also be showcased. These solutions help achieve energy saving, efficiency improvement and cost reduction.
Company：IFW MOULD TEC GMBH
Booth No.：2.1F37
ifw mold solution improves the accuracy and flexibility of high-temperature material injection molding. Through simple mold structure adjustment, plastic products with diameters of 16-32 mm can be produced in the main mold system. The main feature of this unique and easy-to-use injection mold system is the multi-cavity fitting. ifw SE System C (intelligent injection system) improves machine utilization by significantly reducing the mold clamping force required by the injection molding machine. Small-sized injection molds are also suitable for smaller injection molding machines.
Company：XIAN BRIGHT LASER TECHNOLOGIES CO., LTD.
Booth No.：5.2K39
The honeycomb ceramic mold is produced by SLM method, which can eliminate a large amount of EDM processing and greatly shorten the processing time from four months to about 20 days. The processing cost is effectively reduced by avoiding the process of copper electrodes. The product precision is high, and the margin error is within 0.05 mm.
Company：HUIDA PLASTIC MOULD FACTORY
Booth No.：7.1B07
Good Mold structure design; mold steel is purchased from big brand; mold quality very good and durable; mold life very long.
Company：NINGBO TECHMATION CO., LTD.
Booth No.：1.1D46
Picker installed together with injection machine control system adapts the Techmation self-developed SA Communication system to be the communication protocol, It integrates perfectly the Techmation high-end plastic injection machine control system (SANDAL II), high-end picker control system (THUJA), and overall hardware system for peripheral equipment. Together with Techmation new developed MPS servo system, through the injection molding control software, it achieves overall equipment management, production parameter management, real time monitoring, processes traceable functions, etc.
Company：SACMI IMOLA S.C.
Booth No.：2.1F61
SACMI makes the digital revolution in cap and preform production lines effective and efficient by embedding artificial vision in the production process. In the 4.0 configuration. SACMI CVS systems (developed specifically for each Rigid Packaging process and product) are integrated into both the production machines and their processes. This approach extends the concept of vision inspection from mere analysis of defects on the product to the gathering of information that can be used to correct and optimize the process.
Company：PIOVAN PLASTICS MACHINERY (SUZHOU) CO. LTD.
Booth No.：2.1F91
GenesysMax is high performance, fully automatic, mono-hopper drying system that reduces production costs by reducing scraps and energy waste. It is special design and produced for the China Market. It features: reliable PLC with HMI display for a total process control; HMI 10" touch panel; weight loss and IMM mode can be selected to automatically control the hopper loading; optional PureTech filter to effectively block volatile organic matter; and air flow control with calculation. GenesysMax is suitable to dry the main hygroscopic resin that needs dehumidification before injection molding such as PET and rPET.
Company：MOTAN TAICANG CO., LTD.
Booth No. ：4.1A32
The sDRY MM/MD is a dehumfication dryer that consists of the main module MM, two or more drying modules MD and other drying accessories. Each drying module can continuously generate drying with dew point below -40 C up to 1 D hours. It provides stable and low dew point dry air for the entire drying system.
Company：GD HAN'S YUEMING LASER GROUP CO., LTD.
Booth No.：4.1F82
It adopts a professional three-dimensional five-axis CNC system, the C-axis rotates N*360° infinitely, and the B-axis swings left and right ±135°, which can realize high-speed cutting of complex curved parts. Gantry dual-drive structure, high-precision screw, high-precision reducer and servo drive transmission, stable operation, faster positioning speed, higher precision, and better dynamic performance. The cutting head adopts an anti-collision protection design. When it is subject to a certain lateral force, the cutting head will automatically fall to avoid accuracy caused by excessive stress on the spindle. It integrates EtherCAT bus communication and laser control functions, eliminating the need to operate multiple software for collaborative configuration.
Company：NEW TREND INTERNATIONAL LOGIS-TECH CO., LTD.
Booth No.：4.1G82
Customer case study: Located in Jieyang city, Guangdong province, this intra-logistic solution covers an area of 52,010 m with 3 ASRS and 2 packaging workshops for polyolefin production and storage. Till Dec 2022, this highly automated ASRS and packaging system used to be the largest in scale in petrochemical warehouse in Asia, it is also the very first ASRS applied by PetroChina. This petrochemical project is reported by Chinese state media as the "World-class Massive Refining Project. ASRS is connected with packaging line to realize highly automated inbound & storage. Stacker crane up to 32m high. 68,860 storage cells. Integrated with 32 stacker cranes and 5 RGV loops, daily O/B throughput can reach 8,650 t, I/B 8,650 t, total storage exceeds 103,260 t.
Company：NINGBO XINBAILE INTELLIGENT MACHINERY MANUFACTURING CO., LTD.
Booth No.：5.1D01
Operation interface and operation status display panel: digital and intelligent PLC + touch screen. Simple human-machine dialogue makes the operation more convenient. The display screen can clearly show the moving rotation state of the console, dry bucket, material barrel, such as boot, full material, material shortage and raw materials. Circulating water system consists of a factory, workshop or section of water supply or drainage system forming a closed circulation water system. Waste water generated in the system is properly treated and reused, without supplementing or less with fresh water, but without discharging or less with wastewater. The electrical control system is generally called the secondary control circuit of electrical equipment. Different equipment has different control circuits, and the control mode of high-voltage electrical equipment and low-voltage electrical equipment is also different.
Company：YONGYING ELECTRIC TECHNOLOGY (JIANGSU) CO., LTD.
Booth No.：5.1T01
Yongying’s nano far-infrared electric heating coil is an advanced heating equipment with ultra-high efficiency and ultra-low surface temperature. It uses nanoscale high-temperature alloy wire, which has extremely high electric heating conversion efficiency and can achieve ultra-fast heating. By using infrared unidirectional radiation heating, the electric heating coil can rapidly heat up, with a heating rate of up to 17 ℃ per minute under on-site conditions.
Company：ZHANGJIAGANG WOLTER MACHINERY CO., LTD.
Booth No.：7.1A29
The low-light pure PLA crystallization dehumidification and drying process is aimed at more difficult low-temperature crystallization, as well as improving material crystallinity, moisture content, energy saving, etc. This process has been successfully adopted by leading companies around the world.
Company：Good Vision & Motion Shenzhen Co., Ltd.
Booth No.：7.1A62
The first fiber-optic interface camera in China uses large-scale FPGA to achieve ultra-high transmission speed (up to 6400Mb/s), and the photo line frequency reaches 60K. The optical fiber transmission distance is much larger than the Camlink data cable used in other quality inspection systems. The signal is more stable and anti-interference is strong, making it suitable for industrial production environments; The transmission bandwidth is large and supports higher image acquisition speed. This camera has a wide range of applications, including but not limited to paper, plastic, copper foil, aluminum foil, diaphragms and composite materials.
Company：Guangdong Taisen Intelligent Equipment Co., Ltd
Booth No.：8.1D01
Multi-bottle universal compatibility. Without replacing any parts or using any adjusting tools, the whole computer can automatically switch the bottle type. The 50 bottle type parameters of a single machine are stored in the system, which can be used at will. It is convenient, quick and simple, and can be universally used for 100ML-20L plastic bottles of various materials.
Without manual operation, the actions of hanging bags, feeding bottles, stacking, etc. are automatically completed by the machine. According to the size of bottles and the number of bags packed, the output can reach 12,000 bottles/hour. Pulse drive control operation, the energy consumption per hour of the whole machine is only 0.50KW! Compared with the traditional single plastic bag, the roll plastic bag design saves 5%-15% in purchasing cost and material consumption!
Company：YUZHEN ELECTROMIC TECHNOLOGY (SHANGHAI) CO., LTD.
Booth No.：8.1F11
Yuzhen's high-speed preform vision system is an advanced automated equipment specially used to detect the quality of preforms at high speed and accurately. It uses advanced image processing technology and machine learning algorithms to detect the defects, size and shape of bottle preforms in real time, ensuring that the bottles produced meet high quality standards. The equipment features high efficiency, high stability, and easy operation.
Evaluation object score
